State research · Northeast

New Hampshire R&D Tax Credit: 2026 Rules, DP-165 & Calculator

Program status: Current · 10% · DP-165 Application · Award Required

Yes. New Hampshire's Research and Development Tax Credit (RSA 77-A:5, XIII) is a 10% credit for qualified manufacturing research and development wages paid for research performed in New Hampshire. Businesses apply on Form DP-165 by June 30 after the tax year, with federal Form 6765 attached. For 2026 each taxpayer can request up to $50,000, the statewide program is capped at $7 million and requests are prorated if they exceed it. The NH Department of Revenue Administration awards the credit by September 30; it is used against the Business Profits Tax and then the Business Enterprise Tax over the next five tax years.

New Hampshire R&D tax credit at a glance

Program Status
Current
Program Type
Application-based manufacturing R&D wage credit
Statewide cap $7 million — awards may be prorated
10% of NH qualifying manufacturing R&D wages, up to $50,000 per taxpayer
2026 taxpayer cap
$50,000
2026 statewide cap
$7,000,000
Application
Form DP-165 by June 30
Award
By September 30
Use period
Subsequent 5 tax years
Tax
BPT, then BET

Note: Current · Checked October 7, 2026 against the DP-165 instructions, NH DRA guidance, RSA 77-A:5, XIII, RSA 77-E:3-b, Rev 2406.05 and HB 1102 (Chapter 338).

Key takeaway

Important: Narrower Than the Federal Credit

Important: New Hampshire's program is narrower than the federal R&D credit. The current DP-165 calculation focuses on qualifying research wages attributable to New Hampshire. It is not 10% of all federal QREs and not 10% of the federal credit: supplies, contract research, computer and cloud costs do not enter the DP-165 calculation, and the research must relate to a new or improved manufacturing process or business component.

10% · $50,000 cap (2026) · $7M statewide · DP-165 by June 30 · award by September 30 · use over the next 5 tax years

Does New Hampshire Have an R&D Tax Credit?

Yes. New Hampshire's Research and Development Tax Credit under RSA 77-A:5, XIII is an active, application-based credit against the Business Profits Tax, with any unused awarded credit available against the Business Enterprise Tax under RSA 77-E:3-b and Rev 2406.05. It applies only to qualified manufacturing research and development expenditures — wages for qualified research services performed in New Hampshire. Taxpayers apply on Form DP-165, the NH Department of Revenue Administration (DRA) determines the award, and the awarded credit is used during the following five tax years.

The federal R&D tax credit is a separate credit under IRC §41 and is not affected by New Hampshire’s state-level status. See how states are classified.

Key Facts

Program
New Hampshire Research and Development Tax Credit
Credit rate
10% of New Hampshire qualifying manufacturing R&D wages (DP-165 Section C)
Calculation method
DP-165: research wages from federal Form 6765 attributable to New Hampshire × 10%, up to the taxpayer cap
Carryforward
Used within the subsequent 5 tax years
Refundability
No separate R&D-credit refund; the awarded credit offsets BPT, then BET
Research location
Qualifying employee services must be performed in New Hampshire
Key statutes
RSA 77-A:5, XIII; RSA 77-E:3-b
Primary form
DP-165 (application); DP-160 (schedule of credits on the return)
Application
Yes — Form DP-165, with federal Form 6765 attached
Caps and limits
2026: $50,000 per taxpayer, $7,000,000 statewide. From January 1, 2027: $100,000 per taxpayer. From January 1, 2028: $10,000,000 statewide
Effective
Program since 2007; HB 1102 (Chapter 338) caps from 2027 and 2028
Expiration
No sunset date identified
Tax offset
Business Profits Tax; unused awarded credit against the Business Enterprise Tax
Tax years researched
2025, 2026, 2027, 2028

New Hampshire R&D Tax Credit at a Glance

Current · DP-165RSA 77-A:5, XIII
New Hampshire Research and Development Tax Credit — 2026
ItemNew Hampshire
ProgramResearch and Development Tax Credit
TaxBusiness Profits Tax / Business Enterprise Tax
Credit rate10%
2026 statewide annual cap$7,000,000
2026 taxpayer-level maximum$50,000
ApplicationForm DP-165
Application deadlineJune 30 following the taxable period in which the R&D expenditures occurred
Award determinationBy September 30
Use periodSubsequent 5 tax years
RefundableNo separate R&D-credit refund mechanism
Unused awarded creditApplied against BPT, then the unused portion against BET
ProrationYes, if statewide applications exceed the annual cap
Research locationQualifying services must be performed in New Hampshire
Qualified expenditure categoryWages only (current DP-165 methodology)
Federal formFederal Form 6765 must accompany DP-165
2026

Current limits

$50,000

Taxpayer cap
$50,000
Statewide cap
$7,000,000
From Jan 1, 2027

HB 1102

$100,000

Taxpayer cap
$100,000
Statewide cap
$7,000,000
From Jan 1, 2028

HB 1102

$10M statewide

Taxpayer cap
$100,000
Statewide cap
$10,000,000

Source: Research and Development Tax Credit Program (official external site, opens in a new tab) · Research & Development Tax Credit — Frequently Asked Questions (official external site, opens in a new tab) · RSA 77-A:5, XIII — Research and development credit (Business Profits Tax) (official external site, opens in a new tab) · Form DP-165 instructions — Research & Development Tax Credit Application (official external site, opens in a new tab) · HB 1102 (2026), Chapter 338 — increasing the research and development tax credit cap (official external site, opens in a new tab)

How the New Hampshire Credit Is Calculated

DP-165 methodology
  1. Federal Form 6765 Start from the research wages in the federal research credit.
  2. Identify qualifying research wages Wages for qualified manufacturing research (DP-165 Section A — wages only).
  3. Identify wages attributable to NH Only services performed in New Hampshire (Section B).
  4. Apply the NH 10% methodology Section B × 10% (Section C).
  5. Apply the taxpayer cap $50,000 for 2026 ($100,000 from January 1, 2027).
  6. Potential statewide proration If requests exceed $7 million ($10 million from 2028), all credits are reduced proportionately.
  7. DRA award letter NH DRA notifies awards by September 30.
  8. Claim the awarded credit Against BPT, then the unused portion against BET, within the subsequent 5 tax years.

Credit requested = New Hampshire qualifying manufacturing R&D wages × 10%, not more than the taxpayer cap. Example: $200,000 of qualifying New Hampshire research wages → $20,000 requested.

Source: Form DP-165 instructions — Research & Development Tax Credit Application (official external site, opens in a new tab) · Research & Development Tax Credit — Frequently Asked Questions (official external site, opens in a new tab) · RSA 77-A:5, XIII — Research and development credit (Business Profits Tax) (official external site, opens in a new tab)

What Research Qualifies for the New Hampshire Credit?

Manufacturing R&D wagesRSA 77-A:5, XIII(b)

New Hampshire's program is narrower than the general federal R&D credit. "Qualified manufacturing research and development expenditures" are, under the statute:

  1. wages paid or incurred to employees of the business organization;
  2. for services rendered by the employee within New Hampshire;
  3. that are treated as qualified research expenses under IRC §41(b);
  4. for services undertaken to discover information that constitutes qualified research and development;
  5. directed toward a new or improved manufacturing process or business component of the business organization;
  6. that qualify and are reported as a credit by the business organization under IRC §41; and
  7. that are reported in the enterprise value tax base under RSA 77-E.

Potentially qualifying projects include developing a new manufacturing process, improving an existing manufacturing process, developing a new manufacturing business component, or improving an existing one — but each must still satisfy the federal four-part test and the New Hampshire statutory requirements.

Software development, SaaS, consulting, architecture, ordinary engineering, routine testing or quality control, cosmetic changes and market research are not automatically New Hampshire manufacturing R&D. Some of these activities are excluded from qualified research entirely; others qualify only if the project meets the federal and New Hampshire requirements.

Source: RSA 77-A:5, XIII — Research and development credit (Business Profits Tax) (official external site, opens in a new tab) · Research & Development Tax Credit — Frequently Asked Questions (official external site, opens in a new tab)

Federal Form 6765 Is the Substantiation Anchor

Required attachment

DRA's FAQ defines the qualifying New Hampshire expenditures as the wage amounts attributable to New Hampshire that make up the research-credit wage amount on the business organization's federal Form 6765. DP-165 Section A asks for the qualified wages reported on Form 6765, and a copy of Form 6765 must be attached.

If the federal return is not yet due or is on extension and that interferes with the June 30 deadline, DRA requires a pro-forma or draft Form 6765 with DP-165; without it, the application is incomplete. DP-165 cannot be filed without Form 6765 documentation.

Source: Research & Development Tax Credit — Frequently Asked Questions (official external site, opens in a new tab) · Form DP-165 instructions — Research & Development Tax Credit Application (official external site, opens in a new tab)

Research Must Be Performed in New Hampshire

NH services only

Qualifying employee services must be rendered within New Hampshire. Only the share of the Form 6765 research wages for services performed in New Hampshire counts (DP-165 Section B).

Example
ItemAmount
Federal qualifying research wages (all locations)$800,000
New Hampshire-attributable qualifying research wages$300,000
New Hampshire credit estimate$300,000 × 10% = $30,000 (not $800,000 × 10%)

Do not use total payroll, W-2 Box 1 totals, or all engineering or manufacturing payroll. New Hampshire qualifying wages are the wages of employees performing qualifying research services in New Hampshire that are included in the federal research credit. See qualified wages and research location.

Source: RSA 77-A:5, XIII — Research and development credit (Business Profits Tax) (official external site, opens in a new tab) · Form DP-165 instructions — Research & Development Tax Credit Application (official external site, opens in a new tab)

What Does NOT Directly Enter the NH DP-165 Calculation?

Wages only
Federal QRE categories and DP-165
ExpenseDP-165 treatment
SuppliesNot entered in the DP-165 wage calculation
Contract researchNot entered as a DP-165 expenditure
Computer rentalNot entered
Cloud computingNot entered
EquipmentNot entered

These costs may still affect the federal Form 6765 calculation and the overall federal qualified-research analysis, but they are not part of the New Hampshire credit base. Do not confuse federal QREs with the New Hampshire wage base.

Source: Form DP-165 instructions — Research & Development Tax Credit Application (official external site, opens in a new tab) · RSA 77-A:5, XIII — Research and development credit (Business Profits Tax) (official external site, opens in a new tab)

Form DP-165 — Research & Development Tax Credit Application

Application
DP-165 fields
SectionWhat to enter
Section AQualified manufacturing R&D expenditures per the federal return (Form 6765) — wages only
Section BQualified manufacturing R&D expenditures attributable to New Hampshire — wages only
Section CResearch & Development Credit requested: Section B × 10%, not more than the cap ($50,000 for 2026)
AttachmentFederal Form 6765 (pro-forma or draft if the federal return is not yet filed)

Use the current DP-165 version provided by NH DRA for the applicable tax period. DP-165 is the application only — it is not the form used to claim the credit on the tax return.

Source: Form DP-165 instructions — Research & Development Tax Credit Application (official external site, opens in a new tab) · Current Year Forms and Instructions (official external site, opens in a new tab)

How to Apply for the New Hampshire R&D Tax Credit

10 steps
  1. Determine qualifying manufacturing R&D wages.
  2. Determine the portion attributable to New Hampshire.
  3. Complete federal Form 6765.
  4. Complete NH Form DP-165.
  5. Attach federal Form 6765 (a pro-forma or draft copy if the federal return is on extension).
  6. Submit DP-165 by June 30 following the taxable period — online through Granite Tax Connect, or by mail to NH DRA, PO Box 637, Concord, NH 03302-0457 (postmarked by June 30).
  7. NH DRA acknowledges applications.
  8. NH DRA determines awards, reducing all credits proportionately if requests exceed the statewide cap.
  9. Award notices are issued by September 30.
  10. Attach the R&D award letter, with Form DP-160 (Schedule of Credits), when claiming the credit on the applicable New Hampshire business tax return.

Source: Form DP-165 instructions — Research & Development Tax Credit Application (official external site, opens in a new tab) · Research and Development Tax Credit Program (official external site, opens in a new tab) · Rev 2406.05 — Research and Development Tax Credit (Business Enterprise Tax rules, Rev 2400) (official external site, opens in a new tab)

New Hampshire R&D Credit Award Letter

Estimated vs DRA-awarded
Two different numbers
ESTIMATED CREDITDRA-AWARDED CREDIT
What you request on DP-165 (or estimate here)What NH DRA awards in its notice
Wages × 10%, up to the taxpayer capMay be lower if statewide requests exceed the cap (proration)
Not usable on a return by itselfClaimed on the business tax return with the award letter attached
  1. By June 30
    Application — File DP-165 with Form 6765 for the prior taxable period.
  2. By September 30
    Award — NH DRA determines and notifies the awarded amount.
  3. Next 5 tax years
    Claim — Use the awarded credit on the BPT and BET returns (DP-160, BT-Summary), attaching the award documentation.

Taxpayers do not self-claim an estimated amount: the application and the tax-return claim are separate steps, and only the DRA-awarded credit can be used.

Source: Research and Development Tax Credit Program (official external site, opens in a new tab) · Rev 2406.05 — Research and Development Tax Credit (Business Enterprise Tax rules, Rev 2400) (official external site, opens in a new tab) · DP-160 Schedule of Credits — instructions (2023, version 2) (official external site, opens in a new tab) · 2025 BT-Summary instructions (official external site, opens in a new tab)

Statewide Cap and Proration

$7M in 2026

The aggregate credits NH DRA may issue to all taxpayers are capped each fiscal year: $7,000,000 currently, $10,000,000 from January 1, 2028. If the credits applied for exceed the cap, all credits for that year are reduced proportionately. The final award therefore cannot be known until DRA has every application; the estimator shows the award as pending unless you enter an official proration factor or your award letter amount.

Source: Research and Development Tax Credit Program (official external site, opens in a new tab) · RSA 77-A:5, XIII — Research and development credit (Business Profits Tax) (official external site, opens in a new tab) · HB 1102 (2026), Chapter 338 — increasing the research and development tax credit cap (official external site, opens in a new tab)

How Can the NH R&D Credit Be Used?

BPT first, then BETRSA 77-E:3-b; Rev 2406.05

The awarded credit is applied first against the New Hampshire Business Profits Tax. Any unused portion may then be applied against the Business Enterprise Tax. The order is set by the rules — it is not a free choice between the two taxes.

An awarded credit can be used against tax liability during the subsequent five tax years. Example: R&D wages in 2026 → 2026 program award (notified by September 30, 2027) → available for tax years 2027, 2028, 2029, 2030 and 2031.

Illustration — not a calculatorUse example
Awarded credit
$40,000
BPT liability
$25,000
Used against BPT
$25,000
Remaining
$15,000
Used against BET ($10,000 BET)
$10,000
Left for later years
$5,000

Illustrative only, subject to New Hampshire rules.

Source: RSA 77-E:3-b — Credit for research and development (Business Enterprise Tax) (official external site, opens in a new tab) · Rev 2406.05 — Research and Development Tax Credit (Business Enterprise Tax rules, Rev 2400) (official external site, opens in a new tab) · RSA 77-A:5, XIII — Research and development credit (Business Profits Tax) (official external site, opens in a new tab)

Is the New Hampshire R&D Credit Refundable?

No separate refund

The New Hampshire R&D credit is an awarded tax credit used against BPT and, to the extent unused, BET. It is not structured as a general refundable R&D tax credit.

Separately, Rev 2406.05 provides that a taxpayer whose quarterly estimated tax payments result in an overpayment after the credits are applied may request a refund of that overpayment on Form BT-Summary. That is a refund of overpaid tax — not a refund of the R&D credit itself.

Source: Rev 2406.05 — Research and Development Tax Credit (Business Enterprise Tax rules, Rev 2400) (official external site, opens in a new tab) · RSA 77-E:3-b — Credit for research and development (Business Enterprise Tax) (official external site, opens in a new tab) · 2025 BT-Summary instructions (official external site, opens in a new tab)

Unitary Businesses, ERZ Wages and the Enterprise Value Tax Base

NH-specific rules
  • Unitary businesses: a unitary business or an enterprise of one or more taxpayers is a single taxpayer for claiming the credit. Related entities in a unitary group do not each get their own $50,000 ($100,000 from 2027) cap.
  • Economic Revitalization Zone credit: wages for which the R&D credit is taken cannot also be used for the ERZ tax credit under RSA 162-N.
  • Enterprise value tax base: wages included in the R&D credit must also be included in the compensation element of the enterprise value tax base under RSA 77-E, as RSA 77-A:5, XIII and Rev 2406.05 require.

Source: RSA 77-A:5, XIII — Research and development credit (Business Profits Tax) (official external site, opens in a new tab) · Rev 2406.05 — Research and Development Tax Credit (Business Enterprise Tax rules, Rev 2400) (official external site, opens in a new tab)

New Hampshire R&D Credit Changes Coming in 2027 and 2028

HB 1102 — enacted2026 HB 1102, Chapter 338
HB 1102 (Chapter 338)
PeriodPer-taxpayer maximumStatewide annual maximum
Current (2026)$50,000$7,000,000
Beginning January 1, 2027$100,000$7,000,000
Beginning January 1, 2028$100,000$10,000,000

HB 1102 was vetoed on July 10, 2026 because of unrelated state park fee provisions; the legislature overrode the veto on August 19, 2026, and it became law without the governor's signature as Chapter 338. The 2027 and 2028 limits do not apply to 2026 claims.

The statute caps credits per fiscal year of award, and HB 1102 takes effect on calendar dates rather than by tax year. The estimator applies $50,000 to 2025–2026 expenditures and $100,000 from 2027 expenditures; NH DRA decides which limits apply to each award cycle.

Source: HB 1102 (2026), Chapter 338 — increasing the research and development tax credit cap (official external site, opens in a new tab) · RSA 77-A:5, XIII — Research and development credit (Business Profits Tax) (official external site, opens in a new tab)

New Hampshire Credit vs Federal R&D Credit

Narrower

The New Hampshire credit depends on the federal IRC §41 credit — the wages must be qualified research wages reported for the federal credit — but it is not "federal credit × 10%" and not "all federal QREs × 10%". Estimate the federal credit with the federal R&D calculator, see Form 6765, and compare states in the state R&D credit comparison, including Northeast neighbors Maine, Vermont and Massachusetts.

Source: RSA 77-A:5, XIII — Research and development credit (Business Profits Tax) (official external site, opens in a new tab) · Research & Development Tax Credit — Frequently Asked Questions (official external site, opens in a new tab)

Tax-Year Timeline

Each entry applies to the tax years shown. Rules are kept when the law changes, so earlier years remain visible.

  1. Tax years: 2028 and laterScheduled

    2028 and later — $100,000 taxpayer cap; $10 million statewide (HB 1102)

    Statewide annual maximum $10 million from January 1, 2028.

  2. Tax years: 2027Scheduled

    2027 — $100,000 taxpayer cap (HB 1102)

    Per-taxpayer maximum $100,000 from January 1, 2027; statewide cap $7 million.

  3. Tax years: 2025–2026Active

    2025–2026 — $50,000 taxpayer cap; $7 million statewide

    10% of NH qualifying manufacturing R&D wages; DP-165 by June 30; award by September 30; BPT then BET within 5 subsequent tax years.

New Hampshire and the Federal R&D Credit

Research performed in New Hampshire may still qualify for the federal R&D tax credit under IRC §41 if the taxpayer and the research activities satisfy the federal requirements, including the four-part test and the rules for qualified research expenses.

New Hampshire's credit starts from the federal R&D tax credit wages on Form 6765. See the four-part test, qualified research expenses, §41, the federal R&D calculator, the New Hampshire estimator, the program guide, all calculators and forms, the state R&D credit comparison and the state directory.

Calculator Verified

New Hampshire R&D Tax Credit Estimator

Verified for tax years 2025–2028. Results are estimates that show every intermediate value.

Open the New Hampshire R&D Tax Credit Estimator

New Hampshire R&D Tax Credit FAQs

What is the New Hampshire R&D tax credit?

An application-based credit under RSA 77-A:5, XIII equal to 10% of qualified manufacturing research and development wages for research performed in New Hampshire, awarded by NH DRA and used against the Business Profits Tax and Business Enterprise Tax.

How much is the NH R&D tax credit?

10% of New Hampshire qualifying research wages, up to $50,000 per taxpayer for 2026 ($100,000 from January 1, 2027), subject to statewide proration.

What is the 2026 New Hampshire R&D tax credit cap?

$7,000,000 statewide per year and $50,000 per taxpayer.

What is the New Hampshire R&D tax credit per-taxpayer limit?

$50,000 for 2026; $100,000 beginning January 1, 2027 under HB 1102.

What changes in 2027?

Beginning January 1, 2027, the maximum credit per taxpayer rises from $50,000 to $100,000. The statewide cap stays $7 million.

What changes in 2028?

Beginning January 1, 2028, the statewide annual maximum rises from $7 million to $10 million; the per-taxpayer maximum stays $100,000.

What is Form DP-165?

The Research & Development Tax Credit Application: Section A (Form 6765 research wages), Section B (wages attributable to New Hampshire) and Section C (credit requested = Section B × 10%, up to the cap).

When is Form DP-165 due?

Postmarked or filed by June 30 following the taxable period in which the R&D expenditures occurred.

Do I need Federal Form 6765?

Yes. Form 6765 must be attached to DP-165. If the federal return is not yet due or is on extension, attach a pro-forma or draft Form 6765; otherwise the application is incomplete.

Does New Hampshire include supplies?

No. The current DP-165 calculation uses wages only. Supplies may matter for the federal credit but are not part of the New Hampshire credit base.

Does New Hampshire include contractor costs?

No. Contract research is not entered as a DP-165 expenditure; only wages paid to the business's own employees count.

Does New Hampshire include computer costs?

No. Computer rental and cloud computing costs are not part of the DP-165 wage calculation.

Can software development qualify?

Not automatically. The research must be directed toward a new or improved manufacturing process or business component and meet the federal qualified-research rules; software work qualifies only to the extent it meets those requirements.

Does the research have to occur in New Hampshire?

Yes. Only wages for employee services rendered in New Hampshire qualify.

Can I claim the credit for research performed outside NH?

No. Wages for research services performed outside New Hampshire are excluded, even if they are in the federal credit.

Is the NH R&D credit refundable?

No. It is an awarded credit used against BPT and then BET. A refund of an estimated-tax overpayment after credits (through BT-Summary) is a refund of overpaid tax, not of the credit.

Can the credit be used against BET?

Yes, the unused portion after the Business Profits Tax may be applied against the Business Enterprise Tax under RSA 77-E:3-b.

How long can the credit be used?

During the subsequent five tax years. A credit for 2026 expenditures can be used in tax years 2027 through 2031.

What happens if applications exceed the statewide cap?

All credits for that year are reduced proportionately so the total stays within the cap ($7 million; $10 million from 2028).

What is statewide proration?

The proportional reduction of every requested credit when total requests exceed the statewide cap. The proration factor is known only after DRA reviews all applications.

Can related companies each claim $50,000?

Not if they form a unitary business or enterprise: it is treated as a single taxpayer with one cap.

How does a unitary business work?

A unitary business or an enterprise of one or more taxpayers is considered a single taxpayer for claiming the credit, so the group applies for one capped credit. Confirm the application treatment with NH DRA.

Can wages used for the ERZ credit also be used for the R&D credit?

No. Wages used for the R&D credit cannot also be used for the Economic Revitalization Zone credit under RSA 162-N.

When will NH DRA tell me my award?

Award notices are issued by September 30 following the June 30 application deadline.

Is the credit 10% of the federal R&D credit?

No. It is 10% of New Hampshire qualifying research wages, not 10% of the federal credit or of all federal QREs.

Which form do I use to claim the awarded credit?

The awarded credit is claimed on the business tax returns using Form DP-160 (Schedule of Credits), with the award letter attached. DP-165 is only the application.

Do the wages also affect the Business Enterprise Tax?

Yes. Wages included in the R&D credit must also be included in the compensation element of the enterprise value tax base under RSA 77-E.

Is ResearchTaxCredits.org affiliated with NH DRA?

No. ResearchTaxCredits.org is an independent research and educational website and is not affiliated with the State of New Hampshire or the NH Department of Revenue Administration.

Official New Hampshire Sources

  • StatuteContent verified October 7, 2026

    RSA 77-A:5, XIII — Research and development credit (Business Profits Tax) (official external site, opens in a new tab)

    New Hampshire General Court · RSA 77-A:5, XIII

    Supports: Credit for qualified manufacturing research and development expenditures: solely wages paid or incurred to an employee for services rendered within New Hampshire, treated as QREs under IRC §41(b), for services undertaken to discover information that constitutes qualified research and development of a new or improved manufacturing process or business component, which qualify and are reported as a credit under IRC §41 and are reported in the enterprise value tax base under RSA 77-E; credit is the lesser of 10% of the excess over the base amount, the proportional share of the maximum aggregate amount, or $50,000; aggregate $7,000,000 per fiscal year; a unitary business or an enterprise of one or more taxpayers is a single taxpayer; wages for which this credit is taken are not also eligible for the RSA 162-N (Economic Revitalization Zone) credit; credit used within the subsequent 5 tax years.

  • StatuteContent verified October 7, 2026

    RSA 77-E:3-b — Credit for research and development (Business Enterprise Tax) (official external site, opens in a new tab)

    New Hampshire General Court · RSA 77-E:3-b

    Supports: The unused portion of any research and development credit awarded under RSA 77-A:5, XIII is available to apply to the Business Enterprise Tax.

  • RegulationContent verified October 7, 2026

    Rev 2406.05 — Research and Development Tax Credit (Business Enterprise Tax rules, Rev 2400) (official external site, opens in a new tab)

    New Hampshire Department of Revenue Administration · Rev 2406.05

    Supports: DP-165 filed by June 30 following the taxable period; credit taken against business taxes within the 5 taxable periods after the period of the expenditures, first against the Business Profits Tax and then the remainder against the Business Enterprise Tax; the award letter and Form DP-160 are attached to the return; taxpayers whose estimated payments result in an overpayment after applying credits may request a refund of the overpayment on Form BT-Summary.

  • RegulationContent verified October 7, 2026

    Rev 2400 (Business Enterprise Tax) — final proposal fixed text (March 2, 2026) (official external site, opens in a new tab)

    New Hampshire Department of Revenue Administration · Rev 2400 readoption (final proposal)

    Supports: Readoption text of Rev 2406.05: unused R&D credit not applied against BPT may offset BET under RSA 77-E:3-b; DP-165 by June 30; award letter attached when the credit is claimed.

  • Agency guidanceContent verified October 7, 2026

    Research and Development Tax Credit Program (official external site, opens in a new tab)

    New Hampshire Department of Revenue Administration

    Supports: Program established by SB 134 (Chapter 271, Laws of 2007); aggregate limit $7,000,000 per fiscal year since FY2017; each taxpayer's credit not more than $50,000 per fiscal year; if credits applied for exceed $7,000,000 all credits are reduced proportionately; DP-165 postmarked by June 30 following the taxable period of the expenditures; award amounts notified by mail by September 30; DP-165 can be filed through Granite Tax Connect.

  • Agency guidanceContent verified October 7, 2026

    Research & Development Tax Credit — Frequently Asked Questions (official external site, opens in a new tab)

    New Hampshire Department of Revenue Administration

    Supports: Qualified manufacturing R&D expenditures are wages paid to employees for services rendered in New Hampshire that qualify and are reported as a credit under IRC §41 — the wage amounts attributable to New Hampshire that make up the research wages on federal Form 6765; DP-165 must be postmarked by June 30 with Form 6765 attached; a pro-forma or draft Form 6765 must be submitted if the federal return is not yet due or is on extension, or the application is incomplete; credit is the lesser of 10% of the qualified expenditures or $50,000.

  • FormContent verified October 7, 2026

    Form DP-165 instructions — Research & Development Tax Credit Application (official external site, opens in a new tab)

    New Hampshire Department of Revenue Administration · DP-165 instructions

    Supports: Section A: qualified manufacturing R&D expenditures as defined in RSA 77-A:5, XIII(b) reported on federal Form 6765 (wages only), with Form 6765 attached; Section B: the expenditures attributable to New Hampshire activities (wages only); Section C: credit requested = Line B × 10%, not to exceed $50,000; file through Granite Tax Connect or by mail to NH DRA, PO Box 637, Concord NH 03302-0457, postmarked by June 30 following the taxable period.

  • Official webpageContent verified October 7, 2026

    Current Year Forms and Instructions (official external site, opens in a new tab)

    New Hampshire Department of Revenue Administration

    Supports: NH DRA forms library: DP-165, DP-160, BT-Summary and business tax returns for the applicable tax period.

  • FormContent verified October 7, 2026

    DP-160 Schedule of Credits — instructions (2023, version 2) (official external site, opens in a new tab)

    New Hampshire Department of Revenue Administration · DP-160

    Supports: Schedule of business tax credits used to claim awarded credits, including the R&D credit, against BPT and BET.

  • FormContent verified October 7, 2026

    2025 BT-Summary instructions (official external site, opens in a new tab)

    New Hampshire Department of Revenue Administration · BT-Summary (2025)

    Supports: Business tax summary return used with the BPT and BET returns, including requests for refunds of overpayments.

  • LegislationContent verified October 7, 2026

    HB 1102 (2026), Chapter 338 — increasing the research and development tax credit cap (official external site, opens in a new tab)

    New Hampshire General Court · 2026 HB 1102; Chapter 338

    Supports: Section 1 raises the aggregate credits per fiscal year from $7,000,000 to $10,000,000; section 2 raises the per-taxpayer cap from $50,000 to $100,000; section 2 takes effect January 1, 2027 and the research and development provisions otherwise take effect January 1, 2028; vetoed July 10, 2026 over unrelated state park fee provisions; veto overridden August 19, 2026 and enacted without the governor's signature as Chapter 338.

  • AgencyContent verified October 7, 2026

    New Hampshire Department of Revenue Administration (official external site, opens in a new tab)

    New Hampshire Department of Revenue Administration

    Supports: Administers the Business Profits Tax, Business Enterprise Tax and R&D tax credit program.

Statute: RSA 77-A:5, XIII and RSA 77-E:3-b, as amended by 2026 HB 1102 (Chapter 338). Administrative rule: Rev 2406.05. DRA guidance: the R&D Tax Credit Program page, FAQ and DP-165 instructions. Explanations, examples and the estimator on this page are ResearchTaxCredits.org's independent interpretation. Checked October 7, 2026.

Research Methodology & Provenance

Verification
Verified against official sources
Rules last verified
October 7, 2026
Last reviewed
October 7, 2026
Tax years covered
2025, 2026, 2027, 2028
Primary authority
New Hampshire Department of Revenue Administration (official external site, opens in a new tab)
Other authorities
New Hampshire General Court · New Hampshire Administrative Rules
Key authorities
  • RSA 77-A:5, XIII
  • RSA 77-E:3-b
  • Rev 2406.05
  • Form DP-165
  • 2026 HB 1102 (Chapter 338)
Research approach
How we research New Hampshire R&D tax rules: this page relies on primary sources — the New Hampshire Revised Statutes (RSA 77-A:5, XIII and RSA 77-E:3-b), the administrative rules (Rev 2406.05 and the 2026 Rev 2400 readoption text), NH DRA guidance (program page, FAQ, DP-165 instructions, DP-160 and BT-Summary instructions) and the final text of 2026 HB 1102 (Chapter 338). Sources were located on official New Hampshire government domains and confirmed from official-domain search excerpts, as direct retrieval was unavailable. Last reviewed: October 2026. Rules reviewed through: October 2026.

Checked October 7, 2026 against RSA 77-A:5, XIII, RSA 77-E:3-b, Rev 2406.05 (and the 2026 Rev 2400 readoption text), the NH DRA Research and Development Tax Credit Program page and FAQ, the DP-165 instructions, and the final text of 2026 HB 1102 (Chapter 338).

How research is conducted: methodology · state research coverage.

ResearchTaxCredits.org is an independent research and educational website and is not affiliated with the State of New Hampshire or the NH Department of Revenue Administration. Calculator results are estimates; NH DRA determines the final award.

Disclaimer: ResearchTaxCredits.org is an independent research and educational website. It is not affiliated with or endorsed by the IRS, U.S. Treasury, or any state tax authority. Tax laws, regulations, forms, deadlines, and administrative guidance can change. Calculator results are estimates for informational purposes and should not be treated as tax advice or as a determination that a taxpayer qualifies for a credit. This page is general research about New Hampshire tax law; it is not affiliated with or endorsed by New Hampshire Department of Revenue Administration. Full disclaimer.